The first Netgear range extenders were based on a single band of Ethernet technology, but they have since undergone a radical redesign to support multiple bands of Wi-Fi, providing more benefits to internet users worldwide. Because of this, the demand for Netgear’s dual-band WiFi range extenders has increased. For instance, Netgear has a device called the EX3700. However, if you’re experiencing problems like “5GHz WiFi not showing up on Netgear Extender,” you may be able to get it working again by following some simple steps.
However, this is to let you know that the troubleshooting procedures to be followed are nearly identical whether you are done with the Netgear EX3700 setup process or any other model.
Users have reported success with fixing the “5GHz WiFi not showing up on Netgear Extender” issue by physically moving the extender closer to the router. But that’s not all; there are other explanations as well. We’d want to talk about everything that’s bothering you at the moment.
Netgear EX3700 Extender 5GHz Not Working
First, make sure the power is on
Powering your 5GHz WiFi range extender from an unreliable source might severely damage or even destroy the device. The Netgear EX3700 WiFi range extender cannot supply your network with the necessary power if it is not properly connected to a wall socket.
The wireless Netgear EX3700 extender can also be rebooted. The difficulties in displaying the 5GHz WiFi band are likely due to technical issues.
Alter the Extender’s Position
When the 5GHz range extender is put in an undesirable location, users may have the “5GHz WiFi not showing up on Netgear EX3700 Extender” issue. Because the frequency and signal might be affected by the placement of your Netgear range extender, especially if your 5GHz range extender is at a slightly different angle, it is important to emphasize that inappropriate placement may eventually create the problem.
It has been noticed that “5GHz WiFi not showing up on Netgear Extender” could be the consequence of interference from factors like your room’s wall or any metal surface. According to our findings, the performance of a Netgear EX3700 WiFi extender is also negatively affected when installed in a basement or on the lowest level of a commercial structure.
Cut Down the Extender-Router Distance
One possible explanation for the “5GHz WiFi not showing up on Netgear Extender” issue is that the range extender is either too far from the router or too close to it. You should also be aware that it can prevent you from accessing Netgear_ext SSID.
Keeping the Netgear EX3700 range extender at the optimal distance from the router ensures the best possible reception and transmission of signals between the two devices.
Get Rid of WiFi Disruptions
If your range extender is kept close to other devices that create interference, you may get the “5GHz WiFi not showing up on Netgear Extender” issue.
It’s best to position your EX3700 range extender where it will be utilized by the fewest number of devices to reduce electromagnetic interference.
Consider Doing a Firmware Update
5GHz WiFi not showing up on Netgear Extender may be the result of using an older version of the software that controls the range extender. In this case, you must ensure that you are running the latest firmware for your Netgear range extender.
You must check for updates frequently to avoid running into issues like these. Most of you should experience immediate service restoration after the most recent updates are implemented.
Final Words
When everything else fails, you may always restore the Netgear EX3700 to its factory settings if you’re still having issues. Pressing the reset button will reset your Netgear Extender to its factory settings. After that, you can proceed with the regular setup of your Netgear WiFi extender and get the issue fixed.
